Cambridge-soundworks BassCube 821 Subwooer/ Amplifer System Manuel d'utilisateur télécharger pdf (Page 14)

IMPORTANT: Turn off and unplug the

speaker before changing the fuse.

Use only with a 250V fuse

Employer uniquement avec

un fusible de 250V

SPECIFICATIONS FUSE REPLACEMENT

Analog Input:

775 millivolts for full output

10 kohms input impedance

Amplifiers:

Satellite: 60 watts continuous at 1 kHz, two channels

driven at less than .1% total harmonic distortion.

Subwoofer: 150 watts continuous at 100 Hz, one chan-

nel driven at less than .3% total harmonic distortion.

System Frequency response:

Satellite: 150 Hz to 20 kHz, +/- 3 dB

Subwoofer: 32 Hz to 150 Hz +/- 3 dB

Drivers:

Nominal 8 inch subwoofer driver

AC Voltage:

120VAC, 60Hz

Dimensions (H x W x D) and Weights

Subwoofer

11 1/8" x 10" x 10"

263mm x 255mm x 255mm

14 pounds, 8 ounces

6.6 kg

Fuse Replacement

The fuse holder is located in the power connector

at the base of each speaker. The fuse is a 2.5A

MDL type.

To replace the fuse:

1. Unplug the AC cord from the AC power source,

then remove the AC power cord from the speaker’s

power connector.

2. Remove the fuse cap with a small, flat blade screw-

driver (see diagram 2).

3. Remove the fuse from the fuse cap

(see diagram 3).

4. Replace the fuse inside fuse cap with another met-

ric 5X20mm size fuse (see diagram 4).

5. Replace the fuse and cap in the power connector

(see diagram 5).

6. Connect the AC power cord to the speaker.

7. Connect the power cord to an AC power outlet.

5.4.

14141414

1 2 ... 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Cambridge-soundworks BassCube 821 Subwooer/ Amplifer System Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Cambridge-soundworks BassCube 821 Subwooer/ Amplifer System